To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-465 and is the answer not in the manual?
Introduction to general safety rules for operating the contractor's saw and understanding warnings.
Overview of critical safety information and operating guidelines for user protection.
Comprehensive list of essential safety precautions and operating guidelines to prevent injury.
Specific safety rules tailored for the contractor saw, covering operation and potential hazards.
Essential safety guidelines for properly grounding the machine to prevent electric shock.
Detailed steps for assembling the blade guard and splitter assembly for safety.
Further steps for correctly assembling and positioning the blade guard and splitter.
Finalizing the installation of the blade guard, splitter, and table insert for operation.
Guidance on how to start, stop, and secure the saw using its primary controls.
Step-by-step instructions for assembling the guide rails for the rip fence system.
Completing the guide rail assembly and installing the rip fence onto the rails.
Instructions for assembling the fence scale and operating the rip fence for cuts.
General
