To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-085 and is the answer not in the manual?
Provides technical details of the saw's motor, including voltage and speed.
Explains the importance and procedure for grounding the tool to prevent electric shock.
Identifies the designated hazard zone on the saw table and warns against placing hands there.
Explains how to start and stop the saw using the trigger and its brake system.
Instructions for adjusting and locking the table to perform miter cuts at various angles.
Guides on how to tilt the cutting head to achieve bevel cuts and use positive stops.
Details the procedure for making inside and outside corner cuts on crown molding.
Step-by-step guide for safely removing and installing saw blades.
Guide on checking and replacing motor brushes for optimal tool performance.
General
