To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-650 and is the answer not in the manual?
General| Type | Contractor Table Saw |
|---|---|
| Motor Power | 1.5 HP |
| Blade Diameter | 10 inches |
| Rip Capacity | 30 inches |
| Arbor Size | 5/8 inch |
| Voltage | 120V |
| Max Depth of Cut at 90 Degrees | 3-1/8 inches |
| Max Depth of Cut at 45 Degrees | 2-1/4 inches |
| Amperage | 15A |
Provides general safety rules for operating woodworking machinery safely and preventing equipment problems.
Steps to unpack the machine, remove protective coating, and clean unpainted surfaces.
Instructions for assembling the stand legs using brackets and bolts, ensuring proper alignment.
Steps for mounting the assembled stand to the table saw securely, requiring two people.
Instructions on how to turn the table saw on and off using the switch trigger and shield.
Guidance on how to secure the switch in the 'OFF' position using a padlock to prevent unauthorized use.
Step-by-step guide on how to safely remove and install a new saw blade, including necessary tools.
Explanation of the motor's overload protection and how to reset it if the motor shuts off.
Detailed instructions on performing cross-cuts using the miter gage, including safety precautions.
