Delta 36-250 - User Manual

INSTRUCTION MANUAL
Sidekick
10" Compound Slide Saw
(Models 36-240 and 36-250)
PART NO. 902096 (014)
Copyright © 2001 Delta Machinery
ESPAÑOL: PÁGINA 33
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
Bench Model 36-240 Shown

Delta 36-250 Specifications

General

Brand	Delta
Model	36-250
Category	Saw
Language	English

Summary

SAFETY RULES

GENERAL SAFETY RULES

Key safety precautions for operating woodworking machinery.

ADDITIONAL SAFETY RULES

Specific safety rules tailored for compound slide saws.

TOOL SETUP AND CONNECTION

POWER CONNECTIONS AND GROUNDING

Safe electrical hookup and essential grounding procedures.

MOTOR SPECIFICATIONS

Details voltage, frequency, and RPM for the tool's motor.

ASSEMBLY AND STAND SETUP

Instructions for assembling the saw and its stand.

OPERATING CONTROLS AND ADJUSTMENTS

BASIC CONTROLS AND OPERATION

How to use controls, start, stop, and lock the saw.

MITER AND BEVEL ADJUSTMENTS

Procedures for setting table angles for miter and bevel cuts.

FENCE AND GUARD ADJUSTMENTS

Aligning the fence and adjusting the blade guard.

SPECIFIC CUTTING PROCEDURES

SLIDE CUTTING PROCEDURE

Step-by-step guide for performing safe slide cuts.

CHOP CUTTING AND DADO CUTTING

Techniques for basic chop cuts and making dado grooves.

CROWN MOULDING CUTTING

Specific methods for cutting crown molding profiles.

MAINTENANCE AND SUPPORT

BLADE AND BRUSH MAINTENANCE

Procedures for blade replacement and brush care.

ACCESSORIES AND SERVICE INFORMATION

Information on accessories and obtaining support.