Delta T2-30 User Manual

SHOWN WITH MODEL
36-729 CABINET SAW
INSTRUCTIONS
T
²
Fence System
T²-30 (30" Capacity Fence System)
T²-50 (50" Capacity Fence System)
PART NO. 911978 - 04-29-05
Copyright © 2005 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).

Delta T2-30 Specifications

General

Brand	Delta
Model	T2-30
Category	Saw
Language	English

Summary

Important Safety Instructions

Safety Guidelines and Definitions

Defines safety alert symbols (DANGER, WARNING, CAUTION) and includes Proposition 65 warning.

General Safety Rules

Comprehensive rules covering safe operation, maintenance, environment, and power handling.

Assembly Procedures

Front Guide Rail Installation

Guide Tube Attachment

Rear Guide Rail Installation

Fence Mounting and Locking

Adjustments

Adjusting Fence Parallel to Miter Gauge Slots

Procedure for ensuring the fence is parallel to the miter gauge slots using adjusting screws.

Adjusting Fence Perpendicular to Table

Method for making the fence perpendicular to the table using adjusting screws.

Adjusting Fence Locking Handle Clamping

Steps to adjust the fence-locking handle for a secure clamp on the guide tube.

Troubleshooting and Maintenance

Troubleshooting Assistance

Service and Support

Warranty Information