To Next PageTo Next Page
Need help?Do you have a question about the Delta 36-550 and is the answer not in the manual?
Details the electrical requirements and current for the machine.
Provides essential safety guidelines for proper electrical grounding of the machine.
Introductory remarks about the table saw's features and benefits.
Steps for safely removing the machine from its packaging and initial cleaning.
Identification of the various components of the table saw.
Instructions for attaching the handwheel used to adjust the saw blade's height.
Instructions for mounting the guide rail to the saw and extension wing.
Details on the miter gage, its components, and how to use it.
Steps to mount the saw onto its assembled stand.
Guidelines for securely attaching the saw to a workbench or support.
Instructions on how to safely turn the saw on and off.
Procedure to secure the switch in the off position for safety.
Explanation of the overload protection feature and reset procedure.
How to use the handwheel to adjust the blade height.
How to set the precise 90 and 45 degree blade tilt positions.
Instructions for operating and adjusting the miter gage for various cuts.
Step-by-step guide on how to replace the saw blade.
Detailed instructions for making cuts across the grain of the wood.
Detailed instructions for making lengthwise cuts along the grain of the wood.
Contact information for obtaining parts, service, or warranty support.
General
