Need help?Do you have a question about the Delta 40-640 and is the answer not in the manual?
Comprehensive safety rules for operating the scroll saw to prevent personal injury.
Specific safety guidelines for using the scroll saw, including blade and workpiece handling.
Instructions for unpacking the scroll saw and preparing its table surface.
Steps to level the table and attach the holddown assembly bracket.
Connecting the air hose and installing the table insert into the saw's table.
Guidelines for securely mounting the scroll saw to a stable workbench or stand.
Proper power connection procedures and essential grounding instructions for safe operation.
Explanation of the on/off switch, speed control, and switch locking feature.
Step-by-step guide for safely removing and installing scroll saw blades.
How to position the table insert for standard and bevel cutting operations.
Common reasons for scroll saw blade breakage and how to prevent them.
Method for setting the correct tension on the scroll saw blade.
How to tilt the table for bevel cuts and secure its position.
Steps to align the table to be precisely 90 degrees to the saw blade.
How to adjust the holddown foot to properly contact the workpiece.
Positioning the dust blower nozzle for effective debris removal during cutting.
Description of the tool holder for storing accessories like wrenches and blades.
Techniques for cutting along lines, including workpiece control and feed rate guidance.
Instructions for threading the blade through a workpiece for inside cuts.
Recommended lubrication intervals and detailed steps for maintaining the scroll saw.
How to check motor brush wear and when to replace them.
Steps for safely replacing the fuse, specifying the correct type and amperage.
Information on contacting Delta for parts, service, or warranty support.
To Next Page
General
