Delta C200 Series - Page 155

Chapter 11 Description of Parameter Settings|C200 Series
11-56
1051 234 6789
V
60H z
10 6 12345798
-V
6Hz
Pr.03-07~03-09 (Positive/Negative Bias Mode)
Pr.03-10 (Analog Frequency Command for Reverse Run)
0: Negative frequency is not valid.
Forward and reverse run is controlled
by digital keypad or external terminal.
1: Neagtive frequency is valid. Positive
frequency = forward run; negative
frequency = reverse run. Direction
can not be switched by digital keypad or
external teriminal control.
0: No bias
1 :
2: Greater than or equal to bias
3: The absolute value of the bias voltage
while serving as the cent er
4: Serve bias as the center
Lower than or equal to bias
Frequenc
y
10V
11.1 V
Pr.03-11 100%＝ × ＝90.0％
60-6Hz
10V
6-0Hz
XV
＝ XV＝
10
9
＝1.11V
Pr.03-03 100＝× ％
1.11
10
Calculate the gain:
Calculate the bias:
10
5
1 234 6789
V
60H z
54H z
10 6 12345798
-V
60Hz
Frequency
Pr.03-07~03-09 (Positive/Negative Bias Mode)
Pr.03-10 (Analog Frequency Command for Reverse Run)
0: Negative frequency is not valid.
Forward and reverse run is controlled
by digital keypad or external terminal.
1: Neagtive frequency is valid. Positive
frequency = forward run; negative
frequency = reverse run. Direction
can not be switched by digital keypad or
external teriminal control.
0: N o b ia s
1: Lower than or equal to bias
2: Greater than or equal to bias
3: The absolute value of the bias voltage
while serving as the cen te r
4: Serve bias as the center
Pr.03-05 Analog Positive Voltage Input Bias (AUI) = 10%
Pr.03-14 Analog Negative Input Gain (AUI)= 100%
Pr.00-13 Analog Positive Input Gain (AUI)= 100%
Pr.00-21=0
(
D
g
ital ke
y
pad control and d run in FWD direction
)
1051 234 6789
V
60H z
10 6 12345798
-V
60Hz
Pr.03-07~03-09 (Positive/Negative Bias Mode)
Pr.03-10 (Analog Frequency Command for Reverse Run)
0: Negative frequency is not valid.
Forward and reverse run is controlled
by digital keypad or external terminal.
1: Neagtive frequency is valid. Positive
frequency = forward run; negative
frequency = reverse run. Direction
can not be switched by digital keypad or
external teriminal control.
0 : No bias
1: Lower than or equal to bias
2: Greater than or equal to bias
3: The absolute value of the bias voltage
while serving as the cen te r
4: Serve bias as the center
Frequency
Pr.03-14 Analog Negative Input Gain (AUI)= 100%
Pr.00-13 Analog Positive Input Gain (AUI)= 100%
Pr.03-05 Analog Positive Voltage Input Bias (AUI) = 10%
Pr.00-21=0
(
D
g
ital ke
y
pad control and d run in FWD direction
)
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com