Chapter 10 Summary of Parameter Settings|C200 Series
10-3
Parameter Explanation
Settings
Factory
Setting
00-19 PLC Command Mask
Bit 0: Control command by PLC force contro
l
Bit 1: Frequency command by PLC force contro
l
Read
only
00-20
Source of Master Frequency
Command（AUTO）
0: Digital keypad
1: RS-485 serial communication
2: External analog input (Pr.03-00)
3: External UP/DOWN terminal
4: Reserved
5: Reserved
6: CANopen communication
7: Digital keypad potentiometer
0
00-21
Source of the Operation
Command （AUTO）
0: Digital keypad
1: External terminals. Keypad STOP disabled.
2: RS-485 serial communication. Keypad STOP
disabled.
3: CANopen communication card
0
00-22 Stop Method
0: Ramp to stop
1: Coast to stop
0
00-23 Control of Motor Direction
0: Enable forward/reverse
1: Reverse disable
2: Forward disable
0
00-24
Memory of Frequency
Command
Read only
Read
only
00-25 User Defined Characteristics
Bit 0~3: user define on decimal place
0000b: no decimal place
0001b: one decimal place
0010b: two decimal place
0011b: three decimal place
Bit 4~15: user define on unit
000xh: Hz
001xh: rpm
002xh: %
003xh: kg
0
00-26 Max. User Defined Value
0: Disable
0~65535 (when Pr.00-25 set to no decimal place)
0.0~6553.5 (when Pr.00-25 set to 1 decimal place)
0.0~655.35 (when Pr.00-25 set to 2 decimal place)
0.0~65.535 (when Pr.00-25 set to 3 decimal place)
0
00-27 User Defined Value
Read only
Read
Only
00-28
Reserved
00-29 LOCAL/REMOTE Selection
0: Standard HOA function
1: Switching Local/Remote, the drive stops
2: Swithcing Local/Remote, the drive runs as the
REMOTE setting for frequency and operation
status
3: Swithcing Local/Remote, the drive runs as the
LOCAL setting for frequency and operation status
4: Swithcing Local/Remote, the drive runs as
LOCAL setting when switch to Local and runs as
REMOTE setting when switch to Remote for
frequency and operation status.
00-30
Source of the Master
Frequency Command
（HAND）
0: Digital keypad
1: RS-485 serial communication
2: External analog input (Pr.03-00)
3: External UP/DOWN terminal
4: Reserved
5: Reserved
6: CANopen communication
7: Digital keypad potentiometer
0
Call 1(800)985-6929 for Sales
Call 1(800)985-6929 for Sales
To Next Page
Loading...
