Delta C2000 Plus - Page 32

Chapter 4 Fault Codes and DescriptionsParallel Control Solutions
26
ID
Display on LCD Keypad
Fault Name
Fault Descriptions
215
Fiber Card UART Error
(PUtE)
UART communication error between fiber cards
Action and Reset
Action Condition
UART communication error between fiber cards
Action Time
Act immediately
Fault Treatment Parameter
N/A
Reset Method
Manual reset
Reset Condition
Communication between master and slave fiber cards has been restored
Record
Yes
Cause
Corrective Actions
Abnormality between fiber cards or
cables
1. Check if the fiber cards or fiber cables is installed firmly
2. If the issue persists, replace the fiber cards and cables, and contact Delta.