Delta C2000 Plus - Page 33

Chapter 4 Fault Codes and DescriptionsParallel Control Solutions
27
ID
Display on LCD Keypad
Fault Name
Fault Descriptions
216
SPI Rx Error
(CdE2)
CRC error occurs during data transmission from the
fiber card to the drive
Action and Reset
Action Condition
CRC error occurs during data transmission from the fiber card to the drive
Action Time
Act immediately
Fault Treatment Parameter
N/A
Reset Method
Manual reset
Reset Condition
The drive and fiber card reconnect normally
Record
Yes
Cause
Corrective Actions
Abnormality between fiber cards or
cables
1. Check if the fiber cards or fiber cables is installed firmly
2. If the issue persists, replace the fiber cards and cables, and contact Delta.