Delta C2000 Plus - Page 34

Chapter 4 Fault Codes and DescriptionsParallel Control Solutions
28
ID
Display on LCD Keypad
Fault Name
Fault Descriptions
217
PCOM Data Loss
(PDIE)
UART disconnect between fiber cards
Action and Reset
Action Condition
UART disconnect between fiber cards
Action Time
Act immediately
Fault Treatment Parameter
N/A
Reset Method
Manual reset
Reset Condition
Reconnect between fiber cards
Record
Yes
Cause
Corrective Actions
Fiber card or fiber cable
disconnection
Turn off the AC motor drive power and check if the fiber cards and cables are
securely connected