Delta DTB Series - Terminal Definitions, Error Handling, and Input Setup; Specific Model Terminals, Error Status, and Current Input Jumpers

- 13 -
DTB9696 DTB9696RRV
 Error Acknowledgement & Display
Communication error code response description:
Error Status 102EH / 4750H PV read back 1000H / 4700H Error status
0001H M/A PV unstable
0002H 8002H Re-initial, no temperature at this time
0003H 8003H Input sensor did not connect
0004H 8004H Input signal error
0005H N/A Over input range
0006H 8006H ADC fail
0007H N/A EEPROM read/write error
Display message:
Power ON Normal display
PV
DTB series, Firmware V1.50 Present value
SV
Output VR type with Event option Set value
Sensor didn’t connect Input error
PV
No Error
SV
Connect Input
EEPROM error Input over range
PV
Error PV flash when over
SV
EEPROM
 How to Set Up Current Input
For normal input For current input (4 ~ 20mA, 0 ~ 20mA)