Delta DVP-ES2 - Page 891

DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
7-8
Product
Model
Function
EC series AC motor drive
The EC series AC motor drive has
the built-in CANopen interface. It
controls the speed and torque.
TAP-CN01
It is the CANopen network topology
distribution box which carries a 120
ohm resistor. Users can enable the
resistor through the switch.
TAP-CN02
It is the CANopen network topology
distribution box which carries a 120
ohm resistor. Users can enable the
resistor through the switch.
TAP-CN03
It is the CANopen network topology
distribution box which carries a 120
ohm resistor. Users can enable the
resistor through the switch.
UC-CMC003-01A (TAP-CB03),
UC-CMC005-01A (TAP-CB05),
UC-CMC010-01A (TAP-CB10),
UC-CMC020-01A (TAP-CB20)
CANopen sub cable with RJ45
connectors at both ends.
UC-CMC003-01A (TAP-CB03): 0.3 meter
UC-CMC005-01A (TAP-CB05): 0.5 meter
UC-CMC010-01A (TAP-CB10): 1 meter
UC-CMC020-01A (TAP-CB20): 2 meter
UC-DN01Z-01A (TAP-CB01),
UC-DN01Z-02A (TAP-CB02)
CANopen network cable
UC-DN01Z-01A (TAP-CB01):
CANopen main cable
UC-DN01Z-02A (TAP-CB02):
CANopen sub cable
TAP-TR01
It is a 120 ohm resistor with a RJ45
connector.