DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
A-6
3. After the computer is restarted, select “Troubleshoot” under “Choose an option”. And then select
“Advanced options”.
4. From the Advanced options page, select “Startup Settings” to see the Startup Settings. From this page
select “Restart” to restart the computer.
5. Press “7” or “F7” to choose “Disable driver signature enforcement” and the system will direct you to the
Windows 8 operating page. Users can then install the Delta PLC USB driver now.
To Next Page
Loading...
