Delta ShopMaster BS150LS - BAND SAW ASSEMBLY PARTS; Parts Identification for Assembly

7
BAND SAW ASSEMBLY PARTS
FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL
THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE
INSTRUCTION MANUAL.
1. Band Saw
2. 5mm Hex Wrench
3. 4mm Hex Wrench
4. 3mm Hex Wrench
5. M8 x 45mm Hex Head Screw (4)
6. 3/8" Flat Washer (8)
7. M8 Lock Washer (4)
8. M8 Hex Nut (4)
9. Lamp Cord Clamp (2)
10. M6 Lock Washer for Lamp (2)
11. M6 x 20mm Socket Head Nylock Screw for Lamp (2)
Fig. 3
A - Top Mounting Bracket Right & Left (2)
B - Top Bracket Front & Back (2)
C - Lower Bracket Front & Back (2)
E - Lower Bracket Right & Left (2)
L - Stand Legs (4)
A
B
E
C
L
1
2
3
4
5
1
2
3
4
8
7
10
6
5
11
9
Fig. 2
1 - Feet (4)
2 - M8 x 16mm Carriage Bolt (16)
3 - 3/8" Flat Washer (16)
4 - M8 Lock Washer (16)
5 - M8 Hex Nut (16)