Delta TP70P User Manual

Chapter 2 Writing Programs

Mlulti-State Bitmap/Lable
( ): The function of a multi-state image is the same as that of a dynaic
image. The difference between a multi-state image and a dynamic image is that text can be inserted in a
multi-state image.

Numeric Input
(
): A numeric input displayed on the screen of TP70P is used to write a value to a
related device.

X-Y Curve
(
): The values in related devices can be represented by an X-Y curve displayed on the
screen of TP70P.

Alar
m
(
): An alarm and a system alarm are used together. If a condition set is met, an alarm will
appear.

Slider
(
): Users can write a value to a related device by move the indicator on a slider displayed on
TP70P.
The users have to plan pages and add object. They have to add an image representing the connection
between TP70P and an AC motor drive to the boot page. They need to click
on the object toolbar, click
where they want to begin the selection of an area in the working area, hold down the left mouse button, and
drag the cross over the area that they want to select. After the users double-click the object in the working area,
an
Open
window will appear. After the users select a .gif file, an image will appear in the working area.
The state of the AC motor drive used is displayed on page 0, that is, the current rotational speed of the AC
motor drive, a warning message, forward rotation control, backward rotation control, and stop control are
displayed on page 0.
2-9

Delta TP70P Specifications

General

Brand	Delta
Model	TP70P
Category	Monitor
Language	English