Delta TP70P - 2.5 Writing a Program for a PLC

TP70P Quick Start
2.5 Writing a Program for a PLC
TP70P can be used to integrate control, and execute and display functions. The conditions which control
actions can be created in a PLC program. The writing of a program for the PLC used in the example in this
chapter is described below. The Delta software which supports TP70P is WPLSoft and ISPSoft. Please refer to
WPLSoft User Manual and ISPSoft User Manual for more information about the usage of WPLSof and ISPSoft.
In the example in this chapter, WPLSoft version 2.36 is used to write a program for the PLC used.
Step 1: Start W
PLSoft. (
Start

Progra
m
s

Delta Industrial Automation

PLC

WPLSoft 2.36

WPLSoft
2.36
)
Welcom screen
Main screen
2-18