Chapter 5 Parameters_VFD-B Series
5-82
Revision 10/2005, BE13, SW V4.08
When Pr.07-12 and Pr.07-13 are set to 10.00 sec, its response time for the compensation will be the
longest. But if the settings are too short, unstable system may occur.
07 - 14
Accumulative Motor Operation Time (Min.) Unit: 1
Settings 00 ~1439 Factory Setting: 00
07 - 15
Accumulative Motor Operation Time (Day) Unit: 1
Settings 00 ~65535 Factory Setting: 00
Pr.07-14 and Pr.07-15 are used to record the motor operation time. They can be cleared by setting to 00
and time is less than 60 seconds is not recorded.
To Next Page
Loading...
