Need help?Do you have a question about the Delta VFD-L Series and is the answer not in the manual?
General| Control Method | V/F Control |
|---|---|
| Output Voltage | 0 to Input Voltage |
| Cooling Method | Fan Cooling |
| Enclosure Rating | IP20 |
| Overload Capacity | 150% for 60 seconds |
| Protection | Over-voltage, Over-current, Overheat, Under-voltage, Short circuit |
| Braking Unit | Built-in |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Digital Inputs | 5 programmable digital inputs |
| Analog Input | 0-10V, 4-20mA |
| Communication Interface | RS-485 (Modbus) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 90% RH, non-condensing |
| Altitude | Up to 1000m without derating |
| Input Voltage | 200-240V, 380-480V |
Guide to initial setup, parameter setting, and maintenance procedures.
Details on identifying AC drive model, input/output specifications, and serial number.
Breakdown of the VFD-L series model naming convention for easy identification.
Explanation of the serial number format, indicating production details.
Recommended ambient conditions and procedures for storing the AC drive.
Essential precautions for mounting and installing the AC drive to ensure proper function and longevity.
Illustrates the fundamental connections for main circuit and control terminals.
Defines the function of each terminal on the AC drive for proper connectivity.
Details the functions and factory settings of the control terminals.
Specific instructions for wiring the main power and motor connections.
Critical safety and operational notes to follow before and during wiring.
Overview of the digital keypad's display panel and key functions for user interaction.
Step-by-step guide on using the keypad for parameter setting and operation.
Details on user-configurable parameters for drive customization.
Core parameters for setting drive operation, frequency, and voltage.
Parameters that define how the drive is controlled (source of command, stop method).
Parameters related to multi-function outputs and relay operations.
Parameters for configuring multi-function input terminals and potentiometer settings.
Parameters for multi-step speed control and internal PLC programming.
Parameters for setting up over-voltage, over-current, and other protection features.
Parameters related to motor characteristics and compensation.
Parameters for advanced functions like DC braking and power loss operation.
Parameters for RS-485 communication, Modbus, and protocol settings.
Basic checks to detect operational abnormalities and ensure proper functioning.
Recommended maintenance tasks to ensure long-term optimal performance and lifespan.
To Next Page
