Delta VFD-L Series

VFD-L Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
5-38
Output
Frequency
Output
Voltage
08-06
08-05
08-04=d1
Power
Input
Maximum Allowable
Power Loss Time
Baseblock Time
Speed Search
Speed
Synchronization
Detection
Speed search starts
with the Master
Frequency
8 - 08
S
kip Frequency 1 Upper Bound
F
actory Setting: d 0.0
8 - 09
S
kip Frequency 1 Lower Bound
F
actory Setting: d 0.0
8 - 10
S
kip Frequency 2 Upper Bound
F
actory Setting: d 0.0
8 - 11
S
kip Frequency 2 Lower Bound
F
actory Setting: d 0.0
8 - 12
S
kip Frequency 3 Upper Bound
F
actory Setting: d 0.0
8 - 13
S
kip Frequency 3 Lower Bound
F
actory Setting: d 0.0
Settings d 0.0
⇔
d 400Hz Unit: 0.1Hz
08-06
08-05
08-04=d2
Maximum
Allowable Power Loss Time
Baseblock Time
Speed search starts with
Min. Output Frequency

These parameters determine Skip frequency. It will cause the AC drive to skip
operation at these frequency ranges with continuous frequency output.

Pr.8-9, Pr.8-11,Pr.8-13 are for Lower Bound setting, and the settings should follow as
Pr.8-9
x
Pr.8-11
x
Pr.8-13.
8 - 14
A
uto Restart After Fault
F
actory Setting: d 0
Settings d 0 to d 10

After fault occurs (allowable faults: over-current OC, over-voltage OV), the AC drive can
be reset/restarted automatically up to 10 times. Setting this parameter to 0 will disable
the reset/restart operation after any fault has occurred. When enabled, the AC drive will
restart with speed search, which starts at the Master Frequency.