Delta VFD-L Series User Manual

VFD-L Series
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
CHAPTER 1 RECEIVING AND INSPECTIONS
1.1 Nameplate Information ....................................................................... 1 - 1
1.2 Model Explanation .............................................................................. 1 - 1
1.3 Serial Number Explanation................................................................. 1 - 2
CHAPTER 2 STORAGE AND INSTALLATION
2.1 Storage ............................................................................................... 2 - 1
2.2 Installation .......................................................................................... 2 - 2
CHAPTER 3 WIRING
3.1 Basic Wiring Diagram ......................................................................... 3 - 2
3.2 Terminal Explanation .......................................................................... 3 - 3
3.3 Control Terminal Explanation.............................................................. 3 - 3
3.4 Main Circuit Wiring ............................................................................ 3 - 4
3.5 Wiring Notes ....................................................................................... 3 - 5
CHAPTER 4 DIGITAL KEYPAD OPERATION
4.1 Description of the Digital Keypad VFD-PU01 ..................................... 4 - 1
4.2 Operation steps of the Digital Keypad VFD-PU01.............................. 4 - 2
CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS
Group 0: User Parameters ....................................................................... 5 - 1
Group 1: Basic Parameters ...................................................................... 5 - 4
Group 2: Operating Method Parameters .................................................. 5-10
Group 3: Output Function Parameters ..................................................... 5-13

Delta VFD-L Series Specifications

General

Control Method	V/F Control
Output Voltage	0 to Input Voltage
Cooling Method	Fan Cooling
Enclosure Rating	IP20
Overload Capacity	150% for 60 seconds
Protection	Over-voltage, Over-current, Overheat, Under-voltage, Short circuit
Braking Unit	Built-in
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Digital Inputs	5 programmable digital inputs
Analog Input	0-10V, 4-20mA
Communication Interface	RS-485 (Modbus)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Humidity	90% RH, non-condensing
Altitude	Up to 1000m without derating
Input Voltage	200-240V, 380-480V