Need help?Do you have a question about the Delta VFD-V Series and is the answer not in the manual?
General| Series | VFD-V |
|---|---|
| Type | Variable Frequency Drive |
| Protection Level | IP20 |
| Operating Temperature | -10°C to 50°C |
| Enclosure Rating | IP20 |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Input Voltage | 200-240V / 380-480V |
| Frequency Range | 0-400Hz |
| Control Method | V/f Control, Vector Control |
| Communication Protocols | RS-485, Modbus RTU |
| Protection Features | Overvoltage, Overcurrent, Overload, Short circuit, Overheat |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in or external |
| Storage Temperature | -20°C to 60°C |
| Humidity | 90% RH (non-condensing) |
| Cooling Method | Fan cooling |
Standard wiring diagrams for main and control circuits of the VFD-V inverter.
Overview of the digital keypad's buttons and their functions.
Meanings and descriptions of various messages displayed on the keypad.
Step-by-step guide for operating the VFD-PU05 digital keypad.
Parameters related to system settings, identity code, and display.
Fundamental parameters for configuring motor output frequency, voltage, and V/F curve.
Settings for digital input/output terminals and operation control methods.
Settings for various protection functions like over-voltage and over-current.
Troubleshooting guide listing error codes, explanations, and treatments.
Summary of system parameters including identity, display, and reset functions.
Summary of basic parameters for output frequency, voltage, and acceleration/deceleration.
To Next Page