To Next PageTo Next Page
Need help?Do you have a question about the Delta VFD25AMS43AFSHA and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | VFD25AMS43AFSHA |
| Category | Controller |
| Language | English |
Guidelines for proper mounting clearances and installation environment for AC motor drives.
Instructions and diagrams for connecting the AC motor drive, including 1-phase and 3-phase power.
Provides a system wiring diagram illustrating the connections of various components.
Diagram illustrating the main circuit connections and terminal descriptions.
Selection guide for brake resistors and units based on motor HP, kW, and voltage.
Step-by-step guide for installing option cards into the AC motor drive.
Features, product profile, specifications, and communication parameters for the MODBUS TCP option card.
Details on the PROFIBUS DP option card, including features, specifications, and pin assignments.
Information on the DeviceNet option card, covering functions, specifications, and LED indicators.
Features, specifications, and communication parameters for the EtherNet/IP option card.
Details on the CANopen option card, including product profile, RJ-45 pin definition, and specifications.
Specifications for 230V series AC motor drives, including 1-phase and 3-phase models.
Specifications for 460V series AC motor drives, including 3-phase models with/without built-in filter.
Environmental conditions for operation, storage, and transportation of the AC motor drive.
Derating curves and guidelines for ambient temperature and altitude effects on output current rating.
Step-by-step guide for operating the keypad, including main page selection and parameter setting.
Detailed description of drive parameters, including identity codes and rated current display.
Detailed description of basic parameters like operation frequency, voltage, and midpoint settings for motors.
Detailed description of digital input/output parameters, including operation control and multi-function settings.
Detailed description of analog input/output parameters, covering signal selection, bias, gain, and filter time.
Detailed description of motor parameters including full-load current, rated power, and speed.
Detailed description of protection parameters: low voltage, over-voltage, over-current, and over-torque.
Detailed description of protection parameters: output frequency/voltage/current/IGBT temperature at malfunction.
Detailed description of special parameters like software brake, DC brake, and restart after fault.
Detailed description of communication parameters for RS-485, CANopen, and DeviceNet interfaces.
Detailed description of protection parameters related to output frequency, voltage, current, and IGBT temperature.
Describes Modbus function code errors and corrective actions.
Describes Modbus data address errors and corrective actions.
Describes Modbus data errors and corrective actions for exceeding max/min values.
Describes Modbus communication errors and corrective actions for read-only address writes.
Describes IGBT overheating warnings and corrective actions for ventilation and cleaning.
Describes over-current errors during acceleration and corrective actions.
Describes over-current errors during deceleration and corrective actions.
Describes over-current errors during steady state operation and corrective actions.
Describes output terminal short circuit errors and corrective actions.
Describes DC-BUS over-voltage errors and corrective actions.
Describes DC-BUS over-voltage errors during deceleration and corrective actions.
Describes DC-BUS over-voltage errors at constant speed and corrective actions.
Describes phase loss errors and corrective actions for 3-phase or 1-phase applications.
Describes IGBT overheating warnings and corrective actions for ambient temperature and ventilation.
Describes overload errors and corrective actions for excessive output current.
Describes motor overheating errors and corrective actions for PTC level and motor obstruction.
Describes over-torque detection levels and actions based on parameter settings.
List of CANopen fault codes, their displays, descriptions, and fault registers.
Guidance on handling PLC errors displayed on the keypad, including recommended corrective actions.
Provides an overview of the MS300 series Safe Torque Off (STO) function and its specifications.
Describes STO related terminal functions, including action logic and keypad display.
Wiring diagrams for the safe control loop, including internal circuits and external connections.
Instructions for troubleshooting STO, STL1, STL2, and STL3 errors shown on the keypad.
Steps to verify the normal operation of the STO function and confirm safety loop functionality.
