Chapter 10 Summary of Parameter Settings|C200 Series
10-29
Parameter Explanation Settings
Factory
Setting
10-30 Reserved
10-31 Obeserver Gain 0~65535 600
10-32
PM Sensorless Obeserver
Bandwith for High Speed
Zone
0.00~600.00Hz 4.00
10-33
PM Sensorless Obeserver
Bandwith for Low Speed
Zone
0.00~600.00Hz 0.50
10-34
PM Sensorless Observer
Low-pass Filter Gain
0.00~655.35 1.00
10-35
Speed bandwidth
switching
0.00~655.35Hz 10.00
10-36
High/Low speed OBS
bandwidth
0.00~655.35Hz 2.00
10-37
PM Sensorless Control
Word
0000h~FFFFh 0000
10-38
Required Time for PM
Sensorless d-axis Current
Command Return to 0
0.0~6553.5 sec 1.0
10-39
PM Sensorless Frequency
Level to switch from V/F
Mode to Detection Mode
0.00~600.00Hz 20.00
10-40
PM Sensorless Frequency
Level to switch from
Detection Mode to V/F
Mode
0.00~600.00Hz 20.00
10-41
I/F mode, low pass-filter
time
0.0~6.0sec 0.2
10-42
Initial Angle Detection
Time
0~10ms 0
Call 1(800)985-6929 for Sales
Call 1(800)985-6929 for Sales
To Next Page
Loading...
