Chapter 11 Description of Parameter Settings|C200 Series
11-98
It will be recorded as the following table:
First fault Pr.06-17 ovA Pr.06-63 3000 ovA occurs at the 3000 min
after operating.
Second fault Pr.06-17 ovd Pr.06-63 3482
3482-3000=482 min
ovd occurs at 482 min after
last fault (ovA)
Pr.06-18 ovA Pr.06-64 3000
Third fault Pr.06-17 ovA Pr.06-63 4051
4051-3482=569 min
ovA occurs at 569 min after
last fault (ovd)
Pr.06-18 ovd Pr.06-64 3482
Pr.06-19 ovA Pr.06-65 3000
Seven fault Pr.06-17 ocS Pr.06-63 12
(12-5824)+64800=58988 min
ocS occurs at 58988 min after
last fault (ocA)
Pr.06-18 ocA Pr.06-64 5824
Pr.06-19 ocA Pr.06-65 5003
Pr.06-20 ovA Pr.06-66 4051
Pr.06-21 ovd Pr.06-67 3482
Pr.06-22 ovA Pr.06-68 3000
Time interval between errors occur (day)
Factory Setting: Read only
Settings Read only
Time interval between errors occur (minute)
Factory Setting: Read only
Settings Read only
Low Current Setting Level
Factory Setting: 0.0
Settings 0.0 ~ 6553.5 %
Low Current Detection Time
Factory Setting: 0.00
Settings 0.00 ~ 655.35 sec
Treatment for low current
Factory Setting: 0
Call 1(800)985-6929 for Sales
Call 1(800)985-6929 for Sales
To Next Page
Loading...
