Chapter 13 Warning CodesC2000 Plus
ID No. Display on LCD Keypad Warning Name Description
95
Copy PLC: PLC
function (CPLF)
KPC-CC01
Copy PLC function should be executed
when PLC is off
Action and Reset
Action condition Software detection
Action time Immediately acts
Warning setting parameter N/A
Reset method Manual reset
Reset condition Directly resets
Record N/A
Cause Corrective Actions
PLC function is enabled when
KPC-CC01 is running copy PLC
Disable PLC function first, then run the PLC copy function again
To Next Page
Loading...
Need help?
General