Delta VFD13AME43ANNAA

Chapter 11 Summary of Parameter SettingsME300
11-9
Pr. Explanation Settings Default
01-39
Mid-point frequency 2 of
motor 2
0.00–599.00 Hz 0.50

01-40
Mid-point voltage 2 of
motor 2
115 / 230 V series: 0.0–240.0 V
460 V series: 0.0–480.0 V
2.0
4.0
01-41
Minimum output
frequency of motor 2
0.00–599.00 Hz 0.00

01-42
Minimum output voltage of
motor 2
115 / 230 V series: 0.0–240.0 V
460 V series: 0.0–480.0 V
0.0
0.0
01-43 V/F curve selection
0: V/F curve determined by Pr.01-00–01-08
1: 1.5
th
V/F curve
2: 2
nd
V/F curve
0

01-44
Auto-acceleration and
auto-deceleration setting
0: Linear acceleration and linear deceleration
1: Auto-acceleration and linear deceleration
2: Linear acceleration and auto-deceleration
3: Auto-acceleration and auto-deceleration
4: Stall prevention by auto-acceleration and
auto-deceleration (limited by Pr.01-12–01-21)
0
01-45
Time unit for acceleration
and deceleration and
S-curve
0: Unit 0.01 sec.
1: Unit 0.1 sec.
0
01-49 Deceleration method
0: Normal deceleration
1: Overfluxing deceleration
2: Traction energy control
0
01-52
Maximum operation
frequency of motor 2
0.00–599.00 Hz
60.00/
50.00