VIVOTEK - Built with Reliability
User's Manual - 27
Except in the initial setup, changing system time can produce disruptions to the existing
recordings. Turning the current system time back to a time when video recording was taking
place can generate duplicate les. And those les may not be playable.
IMPORTANT:
2. The system will then start to scan the local subnet for connected cameras.
3. All cameras detected on the network will be automatically selected. If necessary, deselect the
cameras you want to exclude from the conguration. Click
Continue
to proceed.
The NVR will automatically change the camera streaming settings. Please do not skip the add
camera process in the setup wizard.
The cameras connected to the NVR PoE ports are placed behind a default gateway 10.1.1.1 or
192.168.2.1.
To Next Page
Loading...