VIVOTEK - Built with Reliability
User's Manual - 97
3-5. Settings
Click the Settings button to start the camera and system settings window. A
conrm box will prompt. Enter User name and Password to proceed.
The system will default to the overview page displaying the camera connection and
storage statuses. An empty position will be left in blank, and a disconnected camera
will be indicated as . The storage volume usage is displayed as the used and
unused spaces.
On a web console, the
Stop Buzzer
,
Reboot
, and
Power-down
buttons are available
on the overview. There are critical conditions that can sound the system buzzer, such
as a disk failure.
3-5-1. Settings - Overview
Not recording
To Next Page
Loading...