DEMAG DRC-DR D2 User Manual

Operating instructions
DRC-DR D2 radio receiver

DEMAG DRC-DR D2 Specifications

General

Brand	DEMAG
Model	DRC-DR D2
Category	Receiver
Language	English

Summary

Operating Instructions

2 Safety instructions

2.2 Appropriate use

2.3 Inappropriate use

2.4 Basic information on safety

2.5 Safety instructions for installation and disassembly

2.6 Safety instructions when first putting the unit into service after completing installation

3 General description

4 Technical data

5 Fitting the radio receiver card

6 Function check after installation

6.1 Putting the receiver into operation for the first time

Procedure for initial setup and operation of the receiver with a transmitter.

Programming parameters of the DRC-DR radio receiver (For authorized personnel only)

1 Menu for programming parameters of the radio receiver

1.1 Activating the menu

Steps to access the radio receiver's parameter programming menu.

1.2 Displaying the current parameters

1.3 Changing between display and entry mode

1.4 Entry mode

1.5 CAN Baud rate

1.6 Setting the node-ID of the radio receiver

1.7 Switching on and off the CAN heartbeat function

1.8 Changing the crane identification

1.9 Displaying the serial number of the radio receiver, Parameter code 005

1.10 Displaying the software version of the radio receiver, Parameter code 006

1.11 Displaying the hardware version of the radio receiver, Parameter code 007

1.12 Frequency hopping