DEMAG DRC-DR D2 - Default Chapter; Table of Contents

2
21495344.indd/311007
Accompanying documents:
DRC -10 operating instructions 214 920 44 720 IS 975
DRC-J operating instructions 214 975 44 720 IS 975
Contents
Manufacturer
Demag Cranes & Components GmbH
P.O. Box 67, D-58286 Wetter
Telephone (+2335) 92-0 · Telefax (+2335) 927676
www.demagcranes.com
1 Foreword 3
1.1 Copyright 3
1.2 Customer service 3
1.3 Liability for Defects 4
1.4 Limitations of liability 4
1.5 Definitions 5
2 Safety instructions 6
2.1 Symbols 6
2.2 Appropriate use 6
2.3 Inappropriate use 8
2.4 Basic information on safety 8
2.5 Safety instructions for installation and disassembly 9
2.6 Safety instructions when first putting the unit into service
after completing installation 9
3 General description 10
3.1 Transmitter/receiver interface 10
3.2 Transmission method 10
4 Technical data 12
5 Fitting the radio receiver card 13
6 Function check after installation 15
6.1 Putting the receiver into operation for the first time 15
7 International postal registration 16
EC conformity declaration 17
Programming parameters of the DRC-DR radio receiver
(For authorized personnel only) 19
1 Menu for programming parameters of the radio receiver 20
1.1 Activating the menu 20
1.2 Displaying the current parameters 21
1.3 Changing between display and entry mode 21
1.4 Entry mode 21
1.5 CAN Baud rate 22
1.6 Setting the node-ID of the radio receiver 22
1.7 Switching on and off the CAN heartbeat function 23
1.8 Changing the crane identification 23
1.9 Displaying the serial number of the radio receiver,
Parameter code 005 25
1.10 Displaying the software version of the radio receiver,
Parameter code 006 25
1.11 Displaying the hardware version of the radio receiver,
Parameter code 007 25
1.12 Frequency hopping 25