1. Getting acquainted with your High Pressure Cleaner
C-250E R14 Page 6
Machine Shut Down Procedure
Release trigger and lower down the pressure by loosening the knob on
the lance.
Turn off the High Pressure Cleaner by turning the
knob anti-clockwise to the OFF position. Switch off
the main power supply
Once machine stop, open the ball valve and needle valve to release trap pressure in the pump
and hose line. Make sure lance is pointing downwards when doing this as pressure could
cause injury.
Once pressure is release, turn off water supply and disconnect inlet
and outlet hose from machine. Dry the machine and store it.
To Next Page
Loading...
