2. Safety and Protection information
C-250E R14 Page 9
Safety devices
The machine is equipped with the following safety devices:
1) Safety Valve protects the machine from over pressure. Once the pressure is set higher than
260~280Bar, the safety valve will open and water will leak out. These indicate, unloader
was adjusted too high. Adjust the unloader back to its rated pressure 250Bar.
4)
Automatic Start / Stop:
These Pressure Washer comes with Automatic Start/ Stop
function for extended life span of the pump. If the machine is running for more than (1.5
minutes) without trigger/ gun being activated then it will shut down automatically. To restart
the machine, simply press the trigger/ gun and the machine will start automatically.
The timer is preset to 1.5 minutes - do NOT change the setting.
DO DON’T
Safety
Valve
To Next Page
Loading...
