CAIRplus Assembly
PR-2009-0096-GB • Subject to modifications • R8-10/2015 29
• Disassemble the lifting lug secured on the base frame.
Fig. 5-11: Lifting lug secured on the base frame
5.2.2 Installation of individual modules
To join individual sections for final assembly (at joints) proceed as follows:
• Attach provided gaskets at the joint (separate assembly in-
structions are enclosed with the supplied sealing strip).
Fig. 5-12: Installing individual modules
Notice!
• You may not use lifting lugsfor suspending the unit from the top on a permanent
basis.
• It is allowed to use lifting lugs only once.
To Next Page
Loading...