Assembly CAIRplus
32 PR-2009-0096-GB • Subject to modifications • R8-10/2015
Additional measure for double-deck and side-by-side units
• Connect both unit sections using supplied plates.
Fig. 5-21: Connecting unit sections
• For offset double-deck units, use the screws as outlined.
Fig. 5-22: Double-deck units
• For offset side-by-side units, use the screws as outlined.
Fig. 5-23: Side-by-side units
Additional measure for units in hygiene design
• Clean and seal internal joint seams at the bottom. The sealant is included in the
packaged content for hygiene units.
Fig. 5-24: Joint seams
To Next Page