DAEnetIP2 v2 User Manual
21 Apr 2020
6.1. Login
Figure 6.3. Login page
Enter the password and click "Login" button. This will bring you to the DAEnetIP2 v2 main
configuration page which contains details for the current firmware version and build date and
provides buttons and links to obtain further details.
Note: The default username and password are admin / admin (passwords are case sensitive).
Note: When the password is entered, it is transmitted across the network in encrypted form, so
eavesdropping on the data transmission will not reveal the username and password.
Note: In order to prevent setup/control conflicts, at any given moment, only one user can be
logged in.
Note: If there is no data traffic between the Web-browser and the DAEnetIP2 v2 for time,
specified by Session Timeout parameter, the session "times out" and a new login is required.
To Next Page
Loading...
Need help?
General