Denkovi DAEnetIP2 v2 User Manual

DAEnetIP2 v2 User Manual
21 Apr 2020
- 7 -
4. Default settings
4.1. Table with default settings
These are the default (factory) settings of DAEnetIP2 v2. When you buy the module, you will
receive it with these settings. If not, you can load the default settings (see point 4.2).
Table 4.1. Default settings
Parameter
(according Web pages)
Value
DHCP
Disabled
IP
192.168.1.100
Mask
255.255.255.0
Gateway
192.168.1.1
Access MAC 1,2
000000000000
SNMP access to IP
Enabled
SNMP listen UDP port
161
SNMP Read-only community string
000000000000
SNMP RW community string
private
SNMP/Web Access network IP
192.168.1.1
SNMP/Web Access network Mask
0.0.0.0 (disabled)
Ping Timeout
6
Restart on incoming ping timeout
Disabled
Restart on remote IP timeout
Disabled
Remote monitor IP
192.168.1.1
I/O ports settings
P3,P5 - Outputs
Pull-up for inputs
Enabled
Reset I/O ports on restart
Disabled
Digital filter for ADC
Enabled
Web Server
Enabled
Web Server TCP port
80
SNMP traps target host
192.168.1.1
SNMP traps community
public
Low/High Analog Trap Threshold
0/1023 (disabled)
Analog Events – Low, High, Acc
None
Web user/password
admin/admin

Denkovi DAEnetIP2 v2 Specifications

General

Brand	Denkovi
Model	DAEnetIP2 v2
Category	Controller
Language	English