DAEnetIP2 v2 User Manual
21 Apr 2020
7. Digital outputs setting priorities
DAEnetIP2 v2 digital outputs can be controlled in the following ways:
Manual (via SNMP, web browser)
Using two ICMP monitoring modes
Analog events
The ICMP monitoring modes have the highest priority. If there is a manual setting request, it
will be ignored. If there is analog events setting request, it will be ignored.
The next priority level are the analog events. If there is a manual setting request, it will be
ignored as well (but the output will toggle for very small period of time - milliseconds).
The smaller priority has the manual setting control.