Dennis POINTER - Introduction

3
Introduction
The purpose of this operation guide is
to provide drivers with information to
help them to operate their vehicles
safely and efficiently. It is
recommended that it is kept with the
vehicle.
Care and attention given at the right
time will ensure efficient and
satisfactory performance. Periodic
attention is necessary, and should help
to avoid breakdowns. Never run the
vehicle in a doubtful condition, always
report back to the garage for inspection
and attention.
In all communications quote the
relevant V.I.N. and engine number.
This will ensure prompt attention.
Vehicles manufactured by TransBus
International, when delivered, comply
with all current Department of Transport
Regulations and Codes of Practice
appertaining.
Whilst every effort is made to ensure
the information given in this handbook
is correct at the time of going to print,
the TransBus International policy is one
of continuous improvement and the
right to change specifications and
equipment without notice is reserved.
Gross Vehicle Weight and Axle
loadings are based upon the maximum
seating capacity of the vehicle, as
delivered, (including Driver).
TransBus International
Customer Care
Dennis Way
Guildford
Surrey
GU1 1AF
England
Telephone: + 44 (0)1483 571271
Fax: + 44 (0)1483 301696
This operation guide is based
on the Pointer body and Dart
SLF chassis original
equipment fitted at the factory.
For this reason, you may find
illustrations and/or certain
parts of the text in this
handbook which do not
correspond exactly to the
particular situation on your
own vehicle.
Dart SLF /Pointer
4 and 6 cylinder models