Denon AVC-A10H - Page 232

o
Bi-Amp
When “Amp Assign” is “11.1ch (Bi-Amp)” and “9.1ch (Bi-Amp) +
ZONE2”, the speaker terminal used for the bi-amp connection of the
front speakers is displayed. Depending on the settings of Main Zone
speaker configuration, the terminal is determined automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the bi-amp connection of the front
speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the bi-amp connection of the front
speakers.
HEIGHT 1:
The HEIGHT 1 speaker terminal is used
for the bi-amp connection of the front
speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the bi-amp
connection of the front speakers.
o
Front B
When “Amp Assign” is “11.1ch + Front B”, the speaker terminal used
for the second front speakers is displayed. Depending on the settings
of Main Zone speaker configuration, the terminal is determined
automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the second front speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the second front speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the second front
speakers.
Contents Connections Playback Settings Tips Appendix
232
Front panel Display Rear panel Remote Index