Denon AVC-A10H - Page 233

o
ZONE2
When “Amp Assign” is “11.1ch + ZONE2”, “9.1ch + ZONE2/3” and
“9.1ch (Bi-Amp) + ZONE2”, the speaker terminal used for the ZONE2
speakers is displayed. Depending on the settings of Main Zone
speaker configuration, the terminal is determined automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the ZONE2 speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the ZONE2 speakers.
HEIGHT 1:
The HEIGHT 1 speaker terminal is used
for the ZONE2 speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the ZONE2 speakers.
o
ZONE3
When “Amp Assign” is “11.1ch + ZONE3” and “9.1ch + ZONE2/3”, the
speaker terminal used for the ZONE3 speakers is displayed.
Depending on the settings of Main Zone speaker configuration, the
terminal is determined automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the ZONE3 speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the ZONE3 speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the ZONE3 speakers.
Contents Connections Playback Settings Tips Appendix
233
Front panel Display Rear panel Remote Index