Need help?Do you have a question about the Denon AVR-1601 and is the answer not in the manual?
Power Amplifier Section| front rated output (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) | 60 W + 60 W |
|---|---|
| front rated output (6 ohms, 1 kHz, 0.7 % THD) | 90 W + 90 W |
| center rated output (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) | 60 W |
| center rated output (6 ohms, 1 kHz, 0.7 % THD) | 90 W |
| surround rated output (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) | 60 W + 60 W |
| surround rated output (6 ohms, 1 kHz, 0.7 % THD) | 90 W + 90 W |
Preamplifier Section| input sensitivity/impedance (CD, DVD/VDP, TV/DBS, VCR, MD/TAPE, FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER) | 200 mV/47 kohms |
|---|---|
| output level/load impedance (SUBWOOFER) | 1.2 V/10 kohms |
| output level/load impedance (MD/TAPE MONITOR, VCR) | 200 mV/47 kohms |
| frequency response (Tone Defeat On) | 10 Hz - 100 kHz (+1, -3 dB) |
| signal-to-noise ratio (Tone Defeat On) | 98 dB (A-weighting) |
| tone control treble | ±10 dB at 10 kHz |
| tone control bass | ±10 dB at 100 Hz |
FM Section| tuning frequency range | 87.5 - 107.9 MHz |
|---|---|
| usable sensitivity | 1.0 µV (11.2 dBf) |
AM Section| tuning frequency range | 520 - 1710 kHz |
|---|---|
| usable sensitivity | 18 µV |
General| power supply | AC 120 V, 60 Hz |
|---|---|
| power consumption | 3.7 A |
| dimensions (W x H x D) | 434 x 147 x 417 mm, 17.1” x 5.8” x 16.4” |
| weight | 9.5 kg, 20.9 lbs |
Warning against opening the unit to prevent electric shock hazards.
Guide to connect video sources like TVs, DVD players, and VCRs.
Instructions for connecting analog audio sources and CD players.
Details on connecting various audio input and output jacks on the unit.
Guide for connecting various speaker systems and impedance considerations.
Identifies and describes the functions of the unit's front panel controls.
Adjusting settings for front, center, and surround speakers.
Configuring the subwoofer mode and its associated parameters.
Measuring and inputting speaker distances from the listening position.
Configuring digital input sources such as CD, DVD, and OPTICAL.
Preparations and initial steps required before operating the unit.
How to select and play audio/video sources from connected components.
Selecting the appropriate input mode for optimal audio playback.
Playing audio from external sources connected via EXT. IN jacks.
Selecting and using the Dolby Surround Pro Logic sound mode.
Configuring Dolby Digital and DTS surround modes with digital inputs.
Adjusting surround sound parameters and simulation modes.
Details on adjusting delay time, room size, and effect level.
Checks if the unit is operated correctly as per the manual.
Verifies the proper connection and functioning of accessories.
To Next Page
