To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-1603 and is the answer not in the manual?
General| Output level | 47000 mV |
|---|---|
| Receiver type | Surround |
| Frequency range | 10 - 10000 Hz |
| Input sensitivity | 200 mV |
| Audio output channels | 5.1 channels |
| Signal-to-Noise Ratio (SNR) | 96 dB |
| Total Harmonic Distortion (THD) | 0.8 % |
| Power output per channel (1KHz@6 Ohm) | 110 W |
| Power output per channel (20-20KHz@8 Ohm) | 80 W |
| HDMI in | 0 |
| AC (power) in | Yes |
| Composite video in | 4 |
| S-Video inputs quantity | 3 |
| Digital audio coaxial in | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | - |
| AM band range | 520 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Optical drive included | No |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Product color | Black |
| Audio decoders | DTS, Dolby Pro Logic II |
| Apple docking compatibility | Not supported |
Weight and Dimensions| Depth | 417 mm |
|---|---|
| Width | 434 mm |
| Height | 147 mm |
| Weight | 10400 g |
Identification and brief explanation of each button, knob, and terminal on the receiver's front panel.
Explanation of the remote control's design, including button functions, signal transmission, and operating range.
Instructions for the three essential steps to prepare the receiver for use, including component connection and remote preparation.
Visual guide showing the recommended placement of front, center, and surround speakers for optimal audio.
Guidance on connecting CD players, tape decks, and other audio components using analog and digital interfaces.
Instructions for connecting video output from TV/DBS tuners, DVD/VDP players, and video decks to the receiver's inputs.
Detailed steps for connecting video game equipment, cameras, DVD players, and tuners using S-Video connections.
Instructions for connecting DVD players and monitors using component video (Y, Pb/Cb, Pr/Cr) jacks for higher quality video.
Instructions on connecting speaker cords correctly, including polarity matching and impedance considerations.
Guidelines on the effective operating range of the remote control and factors that may affect its performance.
Description of system setup items including speaker configuration, input assignments, and audio modes with default values.
Instructions for setting speaker types (Front, Center, Surround) and confirming selections during system setup.
Guidance on selecting the subwoofer mode and setting the crossover frequency for optimal bass response.
Instructions for measuring speaker distances and setting them in the system for accurate sound delay and positioning.
Instructions on how to operate Denon CD players, tape decks, and tuners using the remote control unit's mode switches.
Instructions on turning the unit on/off and selecting front speaker output (A or B).
Guide to selecting audio input sources and choosing input modes like AUTO, PCM, DTS, ANALOG, and EXT. IN.
How to select play modes, adjust master volume, and use tone controls (bass, treble, tone defeat).
Procedure for using test tones to adjust individual speaker output levels for optimal surround sound balance.
How to select speakers and adjust their individual volume levels for precise audio calibration.
Instructions for setting input sources and modes for Dolby Digital and DTS surround playback, including parameter adjustments.
Troubleshooting common issues like no display, no sound, distorted audio, and remote control malfunctions with their solutions.
