Denon AVR-1603 User Manual

Select the input source.
Playback with a digital input
@ Select an input source set to digital (COAXIAL/OPTICAL)
bee page 21 I.
Example:
a Set the input mode to “AUTO” or DTS.
(Mar unit) (Remote control unItI
2
Select the Dolby/DTS Surround mode.
DOLBY, LTS
SJRWNND
D0LB”,DT~
S”RFtO”NO
3
Play a program source with the amm
DIGITAL ’
m mark,
Dl&L
l The Dolby Digital Indicator lights when
-;?I- Light
playing Dolby Digital sources.
l The DTS indicator lights when playrng
DTS sources.
Set the surround parameter according to the source
First, press the SURROUND PARAMETER button.
NOTE:
Please make sure the “AUDIO” position of the slide switch
on the remote control unit.
5, 6, 7,
-4,5,6,7,8
-5,6,7,8
-5, 6, 7, 8
5
O&
Use the 0 (left) and $) (right) buttons to set the CINEMA EQ.
(Initial)
4 b
f”. .;
1.. ; i1-y p<; ;:-:;
;:-y :-.
i..,, i i
:...: ~ :....
‘...’ .!. ! 7 ! . . . . ! ! i i
i,..i r p-
p-pq
. . . . . .
(Remote control urvtl
(j- -0
(left) button (rrght) button
Press the SURROUND PARAMETER or a (down) button to swatch to the D. COMP settrng
38

Denon AVR-1603 Specifications

General

Output level	47000 mV
Receiver type	Surround
Frequency range	10 - 10000 Hz
Input sensitivity	200 mV
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	96 dB
Total Harmonic Distortion (THD)	0.8 %
Power output per channel (1KHz@6 Ohm)	110 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	0
AC (power) in	Yes
Composite video in	4
S-Video inputs quantity	3
Digital audio coaxial in	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	-
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Optical drive included	No
AC input voltage	120 V
AC input frequency	60 Hz
Product color	Black
Audio decoders	DTS, Dolby Pro Logic II
Apple docking compatibility	Not supported

Weight and Dimensions

Depth	417 mm
Width	434 mm
Height	147 mm
Weight	10400 g