Use the 0 (left) and 0 (right) buttons to set the distance from the center speaker to the listening position.
:-.
. . . .
p 1::; ;.. i
. ..:.. :.... :....
.: .-. . . . :
: .,.. ; .... i y ! p;, p::
:
:...:
. . .p “r
.r. .::.. . ...
l The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or a (down) button to switch to the surround speakers setting.
NOTE:
l No setting when “None” has been selected for the center speaker.
Use the 0 (left) and 0 (right) buttons to set the distance from the surround speakers to the listening
posrtion.
:.... . . . . . : :.... ~...
.: .-. . . . :
..A
t.. ! : :.... :....
. . . .
..,,: :.,,: i %, i ... ::
: : .‘: .k “f-
2. ::..: . . . .
l The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or 43 (down) button to enter the setting and switch the DIGITAL input (COAX) setting,
NOTE:
l No setting when “None” has been selected for the surround speakers.
Input the type of components connected to the digital input terminals
USe
the 0 (left) and $) fright) buttons to assign the input function connected to the COAXIAL input (COAXIAL)
terminal.
(Initial)
(left) button fright) button
l Select “OFF” if nothing is connected.
Press the ENTER or a (down) button to switch the optical input 1 (OPTI) setting.
2
@QY
Use the 0 (left) and )$ (right) buttons to assign the input function connected to the OPTICAL input I
4 b
(OPTICAL I) terminal.
(Initial)
.I .; :-: y: -r .I
~. : : :...
.!. .i.
!.,.!r- : J.
: :: :: :
~~~~~1~1~
i.,.. ..... i..:
(& -0
(left) button (right) button
l Select “OFF” if nothing is connected.
Press the ENTER or a (down) button to switch the optical input 2 (OPT21 setting.
21
To Next Page
Loading...
Need help?
General
Weight and Dimensions
