Preparations:
Use the “Auto tuning” or “Manual tuning” operation to tune in the
station to be preset in the memory.
1
Press the MEMORY button
2
Press the SHIFT button and select the desired memory block
(A to E).
(Mm unItI (Remote control urxtl
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
3
Press the PRESET UP or DOWN button to select the desired
preset channel (1 to 81.
4
bmlOR”
Press the MEMORY button again to
%
store the station in the preset
memory.
% To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset - 8 stations
(channels 1 to 8) in each of blocks A to E,
I
Watching the display, press the SHIFT button to select the
preset memory block.
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
2
Watching the display, press the PRESET UP or DOWN button
to select the desired preset channel.
47
To Next Page
Loading...
