To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
How do I get Dolby TrueHD, DTS-HD, Dolby Digital Plus audio output on my Denon Av receiver?
To enable Dolby TrueHD, DTS- HD, and Dolby Digital Plus audio output on your Denon Av receiver, make HDMI connections.
Why can't I select Dolby PLg or DTS NEO:6 mode on my Denon Av receiver?
If you cannot select Dolby PLg mode or DTS NEO:6 mode on your Denon Av receiver, ensure that “Speaker Config.” – “Center” or “Surround” is set to something other than “None”. These sound modes are unavailable if the speaker system is 2.0/2.1ch. Also, Dolby PLg or DTS NEO:6 cannot be selected when headphones are in use.
General| Channels | 7.1 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 1 |
| Network Capability | Yes |
| HDMI Pass-Through | Yes |
| Audio D/A Converter | 192kHz/24-bit |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| HDMI Switching | Yes |
| 3D Technology | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.08 % |
| Bluetooth | No |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Streaming Services | AirPlay, Pandora |
| Dimensions (W x H x D) | 17.1 in x 6.6 in x 13 in |
| Surround Sound Effects | DTS Neo:6, Dolby Pro Logic IIz |
| Additional Features | Audyssey Dynamic EQ, Audyssey Dynamic Volume, Audyssey MultEQ XT |
| Inputs | HDMI input |
| Outputs | HDMI output |
| Video Upconversion | Yes |
| Power Output (8 ohms) | 95 W |
Essential safety guidelines for operating the audio-visual receiver.
Regulatory compliance details for users in the United States.
Cautionary notice regarding hot surfaces during operation.
Important warnings and guidelines for safe unit handling and use.
Recommendations for unit placement to ensure proper heat dissipation.
Introduction to basic functions and operations of the unit.
Guides for connecting compatible and incompatible devices.
Steps for initial setup, including speakers and network.
Instructions for fundamental playback functions.
Detailed steps for speaker installation, connection, and configuration.
In-depth guides for advanced playback features and functions.
Instructions for playing audio in a separate room (ZONE2).
Comprehensive guide to configuring various unit settings via the menu.
Adjusting surround audio effects for personalized listening.
Settings for tone control, dialogue, subwoofer, and volume.
Configuration of Audyssey MultEQ XT, Dynamic EQ, and Dynamic Volume.
Adjustments for dynamic sound quality and frequency equalization.
Settings for contrast, brightness, saturation, hue, noise, and enhancer.
Configuring HDMI output, audio, and control functions.
Managing video output, conversion, and scaling settings.
Setting video output resolution and aspect ratio for displays.
Assigning, renaming, hiding, and selecting input sources.
Adjusting input source levels and selecting video sources.
Connecting to and configuring network settings for LAN.
Manually configuring speaker assignments and configurations.
Setting speaker volume levels and crossover frequencies.
Configuring front speaker usage for different playback modes.
Customizing language, zone, standby, and display settings.
Managing firmware updates and notification settings.
Protecting settings from accidental changes.
Identification of unit components and their functions.
Guidance for resolving common problems and symptoms.
Detailed technical specifications of the audio-visual receiver.
Explanation of each button's operation on the remote control.
Instructions for inserting batteries and remote operating range.
Table showing sound modes, speaker outputs, and adjustable parameters.
Chart mapping input signals to corresponding sound modes.
