Denon AVR-2310CI - Adjusting the Sound (Audio Adjust)


ENGLISH
Getting Started Connections Remote Control Information Troubleshooting SpecificationsMulti-ZoneSettings
In the case of standard playback of multi channel sources, the
AVR-2310CI recognizes the format of the multi-channel audio
input signal and automatically operates the appropriate decoder
for surround sound.
Input signal
The indication contents of
the display
Dolby
Digital
Dolby Digital
(other than 2ch)/
Dolby Digital EX
DOLB� DIGITAL
DOLB� DIGITAL EX
DOLB� DIGITAL+PLgx CINEMA
DOLB� DIGITAL+PLgx MUSIC
DOLB� DIGITAL+PLgz
Dolby Digital Plus
(z1)
DOLB� DIGITAL+
DOLB� DIGITAL++EX
DOLB� DIGITAL++PLgx C
DOLB� DIGITAL++PLgx M
DOLB� DIGITAL++PLgz
Dolby TrueHD (z1)
DOLB� TrueHD
DOLB� HD+EX
DOLB� HD+PLgx CINEMA
DOLB� HD+PLgx MUSIC
DOLB� HD+PLgz
DTS
DTS (5.1ch)/
DTS-ES Discrete 6.1 /
DTS-ES Matrix 6.1 /
DTS 96/24
DTS SURROUND
DTS+PLgx CINEMA
DTS+PLgx MUSIC
DTS+PLgz
DTS+NEO:6
DTS ES MTRX6.1 (z2)
DTS ES DSCRT6.1 (z3)
DTS 96/24 (z4)
DTS-HD (z1)
DTS-HD HI RES
DTS-HD MSTR
DTS-HD+NEO:6
DTS-HD+PLgx CINEMA
DTS-HD+PLgx MUSIC
DTS-HD+PLgz
PCM
PCM
(multi ch)
MULTI CH IN
MULTI IN+PLgx CINEMA
MULTI IN+PLgx MUSIC
MULTI IN+PLgz
MULTI CH IN 7.1
z1：When a signal is input, the HD AUDIO indicator lights.
z2：This is displayed when the input signal is “DTS-ES Matrix 6.1”
and the AVR-2310CI’s “AFDM” setting (vpage 49) is set to
“ON”.
z3：This is displayed when the input signal is “DTS-ES Discrete
6.1”.
z4：This is displayed when the input signal is “DTS 96/24”.
Displaying the currently playing surround mode
nSurround playback of multichannel sources
(Dolby Digital, DTS, etc.)
Selecting the Surround Mode
w Playing in a DENON Original
Surround Mode
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
NOTE
When the input signal is DOLB� TrueHD, DOLB� DIGITAL Plus,DTSHD
you cannot select DENON original surround mode.
The desired mode according to the program source and viewing
situation can be selected from among 7 DENON original surround
modes.
1
Select the input source by pressing
and play the source (vpage
42).
2
Press to select the Surround
mode.
5CH/7CH STEREO
： This mode is for enjoying stereo sound from all
speakers.
ROCK ARENA
： This mode is for enjoying the atmosphere of a
live concert in an arena.
JAZZ CLUB
： This mode is for enjoying the atmosphere of a
live concert in a jazz club.
MONO MOVIE
： This mode is for playing monaural movie
sources with surround sound.
z1
VIDEO GAME
： This mode is suited for achieving surround
sound with video games.
MATRIX
： This mode lets you add a sense of expansion
to stereo music sources.
VIRTUAL
： This mode is for enjoying surround effects
using only the front speakers or headphones.
z1： When playing sources recorded in monaural in the MONO
MOVIE mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
e Direct Playback
In this mode the signals bypass the tone adjustment circuitry for
high quality sound.
The sound is output to the same channels as the input signal.
1
Select the input source by pressing
and play the source (vpage
42).
2
Press to select the “DIRECT”.
Displaying the currently playing surround mode
Input signal
The indication contents of
the display
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital signals
DIRECT
PCM (multi ch)
MULTI CH DIRECT
M DIRECT + PLgx CINEMA
M DIRECT + PLgx MUSIC
M DIRECT + PLgz
M DIRECT 7.1
Front
Front
Rear
Rear
Playback