Denon AVR-2311 - Tuning in radio stations; PTY search function; TP (Traffic Program) search; RT (Radio Text) display

23
ENGLISH
Advanced versionSimple version InformationBasic version
Playing an iPod
®
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu “iPod” (vpage65). Press uio p to
return to the original screen.
• To play back compressed audio with extended bass or treble
reproduction, we recommend playback in RESTORER mode
(vpage57). The default setting is “Mode 3”.
• In Browse mode, press
STATUS during
playback to check the title name, artist
name, and album name.
NOTE
• Press POWER OFF and set this unit’s power
to the standby mode before disconnecting
the iPod. Also switch the input source to
“DOCK” before disconnecting the iPod.
• Depending on the type of iPod and the software version, some
functions may not operate.
• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iPod when using this unit in
conjunction with the iPod.
n Viewing videos on an iPod
®
in the Browse mode
When an iPod equipped with a video function is connected to a
DENON ASD-11R, ASD-3N, ASD-3W, ASD-51N and ASD-51W
control dock for iPod, image files can be played in the Browse mode.
1
Use ui to select “Videos”, then
press ENTER or p.
2
Use ui to select the search item
or folder, then press ENTER or p.
3
Use ui to select the video le,
then press ENTER, p or 1.
Playback starts.
n Viewing photos and videos on an iPod
®
in the
Remote mode
This unit can play back on a TV screen photos and data stored on an
iPod equipped with a slide show or video function.
1
Press and hold SEARCH to set the
Remote mode.
“Remote iPod” or “Dock Remote” is
displayed on the display of this unit.
2
Watching the iPod’s screen,
use ui to select “Photos” or
“Videos”.
• Depending on the iPod model, it may be necessary to operate the
iPod unit directly.
3
Press ENTER until the image you want to view is
displayed.
“TV Out” at the iPod’s “Slide show Settings” or “Video Settings”
must be set to “On” in order to display the iPod’s photo data or videos
on the monitor. For details, see the iPod’s operating instructions.
NOTE
Video may not be output, depending on the combination of ASD-1R,
ASD-11R, ASD-3N, ASD-3W, ASD-51N or ASD-51W and iPod.
n iPod operation
Operation buttons Function
MENU Amp menu
uio p
Cursor operation
z1
ENTER Enter
z2
SEARCH
(Press and release)
Page search mode
z3
SEARCH
(Press and hold)
Browse / Remote mode switching
RETURN Return
6 7
(Press and hold)
Manual search
(fast-reverse/fast-forward)
1
Playback / Pause
8 9
Auto search (cue)
3
Pause
2
Stop
RESTORER RESTORER
MEMORY Store memory
z4
TV POWER TV power on/standby (Default : SONY)
TV INPUT Switch TV input (Default : SONY)
• Repeat playback (vpage52 “Repeat”)
• Shuffling playback (vpage52 “Shuffle”)
z1 If you press
ui during playback, auto search starts. If you press
and hold ui, manual search starts.
z2 If you press ENTER during playback, playback pauses. If ENTER is
pressed during pause, playback resumes.
If you press and hold ENTER, playback stops.
z3 This functions when an ASD-1R, ASD-11R is used.
Press SEARCH, then press o (previous page) or p (next page).
To cancel, press ui or SEARCH.
z4 This functions when an ASD-3N, ASD-3W, ASD-51N or ASD-51W
is used.